Studio 1 Live

From Broadcast & Media Communications
Jump to: navigation, search

Contents

Setup Duties

FLOOR DIRECTOR

  • Tables, chairs, news desk moved to south side of studio
  • News desk moved to Floor Monitor storage area by dimmer console
  • Studio Floor Swept
  • Risers from Scene Storage to floor marks in Interview Set
  • Table and Chairs positioned for Interview Set, and Table for Demo Set
  • Floor Monitors
    • 1 floor monitor from South wall Powered on for Interview Set
      • Connect BNC cable to ROUTE OUT of FAX Panel 3
    • 1 floor monitor from West wall Powered on for Demonstration Set
      • Connect BNC cable to ROUTE OUT of FAX Panel 2
    • Routing Switcher Panel West of double doors set to CTL PGM 1
  • Limbo curtain stretched from Interview Set to Demo Set

CAMERA OPERATORS

  • Lighting / CAM 1
    • Chart light circuited to Non-Dim 30 and powered ON
    • ALL Flagged lights circuited on Circuit Board and powered on
    • Lights for Duratran on Interview Set circuit to Non-Dim and powered ON
  • Ped Cameras / CAM 2 & 3
    • Roll to chart / Framed & focused on Chart
    • Work with CCU to White Balance
    • Intercom Headsets from Black cabinet connected
  • External Camera / CAM 4
    • Sign out from Field Equipment Room (Ops):
      • 2xBatteries, Charger, Tripod
    • Get Sony DSR 400 from behind switcher console in TV Control 1
    • Get Umbilical cable from West wall of Studio 1
      • Connect White BNC cable between BLK on FAX Panel 1 and GEN LOCK IN on Sony DSR 400
      • Connect Red BNC cable between L-1 on FAX Panel 1 and MONITOR OUT on Sony DSR 400
    • Beltpak and Headset from Black Cabinet for Camera 4
    • Cam 4 Beltpak cabled to FAX Panel 1 CAM / Headset connected to Beltpak for Cam 4
    • Power ON
    • Framed & focused on Chart (also check backfocus)

CCU

CG

  • Wake Computer (it is always on – and stays on)
  • Build show slate, show title page, name keys for all talent, “next time” page
    • Responsible for getting the correct information for above

TD

  • Turn on monitor wall
  • Route Frame 1 (playback) into Routing Switcher “PORT 1” and VTR 5 (BetaCamSP record) into Routing Switcher “PORT 2”
  • Turn Waveform and Vectorscope on
  • Patch “Studio 1 Line 1” to “Switcher 1 Input 5” (which is “camera 4” on switcher) in CCU & RACKS (Room 244)
  • Route VTR 15 (Omneon Server) into Framestore 1 in VTR (Room 250)

  • Load Studio 1 group in intercom
  • Set and operate countdown clocks
  • Proofread CG pages

Server Op

  • Route Control 1 Program to VTR 5 (BetaCamSP for record)
  • Set VTR 5 record audio record levels when Audio sends tone
  • Transfer correct B-Roll item from Editshare to Omneon playlist (Thumb drive or External HDD)
  • Select commercials (:30 x 2) from Omneon playlist

AUDIO OPERATORS / A1 & A2

  • Wireless Mics
    • Receivers (RX) and Transmitters (TX) powered ON
    • Antennas connected to RX
    • RX cabled to FAX Panel 1 by BLACK XLR audio cable
    • TX signal confirmed on RX
  • Wired Mics (backups)
    • 1 Lav mic cabled to FAX Panel 5 for Interview Set by RED XLR audio cable
    • 1 Lav mic cabled to FAX Panel 2 for Demonstration Set by RED XLR audio cable
  • Intercom (I/C)
    • Long I/C cable from FD circuit on FAX Panel 2
    • Beltpak from Black Cabinet for FD on this cable
    • Headset from Black Cabinet connected to Beltpak for FD
    • Long I/C cable from FD circuit on FAX Panel 5
    • Beltpak from Black Cabinet for Instructor on this cable
  • Audio Control 1 – A1
    • Turn on Mac Pro and video monitors
    • Route Control 1 program to video monitors
    • Patching:
      • mic’s from Studio 1
      • "Route 1" output (Omneon Playback)
      • Mac Pro (for Music Playback)
      • V/O booth
    • Turn on Preview video monitor in V/O booth

Strike Duties

CAMERA OPERATORS

  • Ped Cameras / CAM 2 & 3
    • Peds rolled to storage position west wall Studio 1
    • Cables neatly figure-8 coiled on floor
  • External Camera / CAM 4
    • Disconnect umbilical cable from FAX panel 1
    • Figure-8 neatly / close with Velcro / hang on wall next to Black cabinet
    • Intercom headset and beltpak disconnected and stored in Black Cabinet
    • Power OFF camera
    • Return camera to Field Equipment Room (Ops)
      • Camera, Batteries, Charger, Tripod
  • Lighting / CAM 1
    • ALL dimmers down
    • ALL non-dims off
    • All lights de-circuited on Yellow circuit board
    • Power off dimmer console

FLOOR DIRECTOR

  • Floor Monitors
    • Disconnect and neatly coil BNC and A/C power cords underneath both monitor carts
    • Return monitors to storage position on West wall next to dimmer console
    • Routing Switcher Panel West of double doors set to BLACK
  • Return Risers to Scene Storage
  • Return News desk to Interview set
  • Check contents of black audio cabinet with A2 and Lock
  • Check contents of Tool Locker in Audio Lock between studios and lock
  • Sweep Studio Floor

TD

  • Turn off monitor wall
  • Routing Black into Routing Switcher “PORT 1” and “PORT 2”
  • Turn Waveform and Vectorscope off
  • Remove Studio 1 patching in CCU & RACKS
  • Route Black into Framestore 1

CG

  • Turn off monitor (NOT the computer)

  • Unload Studio 1 group in intercom

Server Op

  • Route Black to VTR 5 (Record)
  • Eject (do not rewind) BetaCamSP Record tape
  • Power off VTR 5 and monitors
  • Turn off monitor (NOT the computer) for Omneon playout computer in Control 1

AUDIO OPERATORS

  • Studio / A2
    • Wireless Mics
      • Power off
      • Disassemble and return to cases
      • Disconnect and coil all cables
      • Return cases to Black storage cabinet
      • Hang cables on appropriate pegs
    • Wired Mics
      • Disconnect and return to Black storage cabinet
      • Coil all cables
      • Hang cables on appropriate pegs
    • Intercom (I/C)
      • Beltpak and Headset for FD and Instructor returned to Black Cabinet
      • Cables neatly coiled and hung on appropriate peg
  • Audio Control 1 / A1
    • All Faders on Mixer console down
    • Turn off Mac Pro and video monitors
    • Route Black to video monitors
    • Remove all Patching
    • Hang cables
    • Turn off Preview video monitor in V/O booth

CCU

  • Power off:
    • CCUs and B&W picture monitors x 3
    • LCD Monitor for rasterizer
    • Waveform monitor for Camera 3
    • Colour picture monitor
    • Waveform/Vectorscope combo unit above colour picture monitor